What are the precautions for spraying machine maintenance
1. According to the viscosity of the paint and the thickness of the particles, select a paint filter with a suitable mesh. After spraying, the dirt on the filter should be removed in time, and the damaged filter should be replaced in time.
2. When diluting the paint or cleaning the equipment, use the solvent specified for the paint to avoid abnormal precipitation or agglomeration of the paint, blocking the paint filter, high-pressure valve port, high-pressure pipeline and spray gun and other channels, and spraying is impossible. Especially when the paint is diluted, it must be carried out strictly in accordance with the technical requirements of the paint, so as not to affect the performance of the paint.
3. The two major components of the cylinder and the air distribution system should not be scrubbed with strong organic solvents, and should not be immersed in strong solvents.
4. Cylinders, gas distribution systems, upper and lower pilot valves, lubricators, pressure regulators and other gas circuit components should not get into rust, sand, dust and other stolen goods when assembling after cleaning and maintenance. The foreign matter on the air intake filter element should be removed regularly to prevent the decrease of air intake and affect the sprayer pressure.
5. After spraying, the equipment should be cleaned in time. Otherwise, curing agglomerated paint will aggravate the wear of the paint cylinder, piston rod, seal ring and other parts and shorten the service life of the equipment.
6. If you need to replace the seals (rubber or PTFE), paint cylinders, piston rods, pressure-bearing parts of the paint hydraulic system, springs, air motors, and air distribution systems and other important parts during maintenance, please use the original Supporting products to ensure the normal operation of the equipment.
7. The spray gun head, nozzle, etc. must be cleaned after spraying. For frequent use, you can soak the mouth with a solvent to prevent the unwashed paint from solidifying and blocking the gun head.

