Powder coating precautions? how many points do you know
Powder spraying is to spray powder coating on the surface of the workpiece with powder spraying equipment (electrostatic spraying machine). Under the action of static electricity, the powder will be uniformly adsorbed on the surface of the workpiece to form a powder coating; Baking and leveling curing, it becomes the final coating with different effects (different types of powder coatings); the spraying effect of powder spraying is superior to the spraying process in terms of mechanical strength, adhesion, corrosion resistance, aging resistance, etc., and the cost is also Under spray paint with the same effect.
(1) Surface treatment In order to give full play to the characteristics of powder coating and prolong the service life of the coating film, the surface of the object to be coated is first subjected to surface pretreatment strictly.
(2) Spraying efficiency When spraying, the object to be coated must be completely grounded to increase the spraying efficiency of powder coating.
(3) Smooth and smooth For the coated objects with large surface defects, conductive putty should be applied to ensure the smoothness and smoothness of the coating film.
(4) After the temperature and time spraying, the objects need to be heated and cured. The curing conditions are subject to the technical specifications of the powder products, but the curing temperature and time must be fully guaranteed to avoid quality accidents caused by insufficient curing.
(5) Check the defects immediately after spraying the powder. If defects are found, they should be dealt with in time. If defects are found after curing, the scope is small and only localized without affecting the surface of the coated object. The same color powder can be diluted with acetone and repaired. If the range is large and affects the surface quality, after sanding it, spray it again or remove the coating with a paint remover, and then re-spray.
(6) Removal of debris recovery powder must be screened to remove debris, and then mixed with new powder in a certain proportion.
(7) Powder pollution The powder supply barrel, powder spraying room and recovery system should avoid the pollution of other powders of different colors, so it must be cleaned every time the color is changed.

