How to Save on Powder Coating
How to Save on Powder Coating
As for the powder coating used in the electrostatic spraying production line, should it be stored after use, should it be discarded or ignored? When I wanted to use it again, I found that the powder coating was agglomerated or doped with a lot of impurities, which was very detrimental to the subsequent use of the powder coating. Learn how to save:
If there is powder coating residue after use, during the storage process, avoid storing it in a place that is easily contaminated by water, organic solvents, oils or other substances. Powder coatings should not be exposed to air at will after use. It should be capped or fastened at any time to avoid contamination. Store powder coatings away from fire and direct sunlight, and in a well-ventilated place with a temperature below 35°C.
It is important that we also try to avoid long-term contact of powder coatings with the skin, and the powder attached to the skin should be washed off with soap and water. The equipment used in the coating operation must be well grounded to eliminate static electricity and prevent the endless discharge of the coating machine during work. Spray powder indoors. The concentration of floating dust should be controlled within the safe range as possible to avoid dust explosion in the event of fire.
